UL 514D

Click here to purchase
Please note: All interim revisions for this edition available at time of your purchase will be included.

Cover Plates for Flush-Mounted Wiring Devices
UL 514D
1 Scope

1.1 This standard applies to metallic and nonmetallic cover plates and associated gaskets for flush-mounted wiring devices intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, CSA C22.1, General Requirements – Canadian Electrical Code, Part II, CSA C22.2 No. 0-10.

1.2 This standard also applies to outlet box hoods that are either integral or not integral with a cover plate for flush-mounted wiring devices.

1.3 This standard also applies to cover plates for flush-mounted wiring devices intended for use in marine applications in accordance with the applicable requirements of the United States Coast Guard and the Canadian Coast Guard; IEEE Recommended Practice for Electrical Installation on Shipboard, IEEE 45; the American Boat and Yacht Council; and the Standard for Pleasure and Commercial Motor Craft, NFPA 302.

1.4 This standard also applies to illuminating cover plates for flush-mounted wiring devices.

1.5 This standard does not apply to:

• telephone wall plates; or
• cover plates and associated gaskets intended for use in hazardous (classified) locations as defined in the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, CSA C22.1

Product Details

Edition:

2

Published:

06/28/2013

Number of Pages:

64