Click here to purchase
API Spec 17E specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of subsea control systems, chemical injection, gas lift, utility and service umbilicals and associated ancillary equipment for the petroleum and natural gas industries.

17E applies to umbilicals containing electrical conductors, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination.

It also applies to umbilicals that are for static or dynamic service, and with routings of surface-surface, surface-subsea and subsea-subsea.

This edition of API Spec 17E is an identical adoption of ISO 13628-5 with the addition of an API Monogram Annex.

Product Details

Edition:

3rd

Published:

07/01/2003

ANSI:

ANSI Approved

Number of Pages:

105

File Size:

2 files , 1 MB

Product Code(s):

GX17E03, GX17E03, GX17E03

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase
This document specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation, and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. Ancillary equipment does not include topside hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination.

This also applies to umbilicals containing components, such as electrical cables, optical fibers, thermoplastic hoses, and metallic tubes, either alone or in combination. The document also applies to umbilicals that are for static or dynamic service, with surface-surface, surface-subsea, and subsea-subsea routings.Tube dimensions addressed by this document are wall thicknesses less than 6 mm (0.2 in.) and internal diameters less than 50.8 mm (2 in.). This document applies to electrical cables for rated voltages from 1kV (Um = 1.2kV) up to 30kV (Um = 36kV).

This document does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment. It also does not apply to a tube or hose rated lower than 7 MPa (1015 psi).

Product Details

Edition:

5th

Published:

07/01/2017

ANSI:

ANSI Approved

Number of Pages:

178

File Size:

1 file , 1.5 MB

Redline File Size:

2 files , 11 MB

Product Code(s):

G17E05, G17E05, G17E05R, G17E05, G17E05R, G17E05, G17E05R, G17E05, G17E05

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase
This document specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of subsea control systems, chemical injection, gas lift, utility and service umbilicals and associated ancillary equipment for the petroleum and natural gas industries. This also applies to umbilicals containing electrical conductors, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination; and applies to umbilicals that are for static or dynamic service, and with routings of surface-surface, surface-subsea and subsea-subsea.

Product Details

Edition:

4th

Published:

10/01/2010

ANSI:

ANSI Approved

Number of Pages:

167

File Size:

1 file , 1.6 MB

Redline File Size:

2 files , 3.9 MB

Same As:

ISO 13628-5:2009

Product Code(s):

GX17E04, GX17E04, GX17E04

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria