Standard Recommended Practice – Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment
standard by National Association of Corrosion Engineers,

Standard Recommended Practice – Application of Cathodic Protection for External Surfaces of Steel Well Casings
standard by National Association of Corrosion Engineers, 03/01/1986

Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service
standard by National Association of Corrosion Engineers, 01/01/2002

3D Optical Imaging Techniques
Report / Survey by National Association of Corrosion Engineers, 05/25/2023

Standard Test Method – Holiday Detection of Internal Tubular Coatings of Less Than 250, um (10 mils) Dry Film Thickness
standard by National Association of Corrosion Engineers, 10/01/2002

Standard Test Method – Testing of Embeddable Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete
standard by National Association of Corrosion Engineers, 10/15/2001

Standard Material Requirements – Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
standard by National Association of Corrosion Engineers, 03/03/2003

Considerations for Water Reuse in Industrial Plants
Report / Survey by National Association of Corrosion Engineers, 05/01/1997

Standard Recommended Practice – Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 um (10 to 30 mils)
standard by National Association of Corrosion Engineers, 03/15/2001

Emergency Guideline 2 – Protective Coatings for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing
standard by National Association of Corrosion Engineers, 02/18/1997