BS PD ISO/TS 19880-1:2016

Click here to purchase
BS PD ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate,for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light dutyland vehicles (e.g. Fuel Cell Electric Vehicles).

NOTE These recommendations are in addition to applicable national regulations and codes, which canprohibit certain aspects of this document.

This document is applicable to fuelling for light duty hydrogen land vehicles, but it can also be used asguidance for fuelling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storagecapacities outside of current published fuelling protocol standards, such as SAE J2601.Residential applications to fuel land vehicles and non-public demonstration fuelling stations are notincluded in this Technical Specification.

This Technical Specification provides guidance on the following elements of a fuelling station (seeFigure 1 and Figure 2):

• hydrogen production/delivery system
• delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydridestorage trailers;
• on-site hydrogen generators using water electrolysis process or hydrogen generators using fuelprocessing technologies;
• liquid hydrogen storage;
• hydrogen purification systems, as applicable;
• compression
• gaseous hydrogen compression;
• pumps and vaporizers;
• gaseous hydrogen buffer storage;
• pre-cooling device;
• gaseous hydrogen dispensers.

Cross References:
ASTM D7606-11
ASTM D7650-13
ASTM D7651-10
EN 13480-1
EN 13480-2
EN 13480-3
EN 13480-4
EN 13480-5
EN 13480-6
EN 13480-7
EN 13480-8
ISO 834-1
ISO 4126-1
ISO 4126-2
ISO 4414
ISO 10286
ISO 11114-1
ISO 11114-4
ISO 12100
ISO 13849-1
ISO 13849-2
ISO 13850
ISO 14113
ISO 14687-2
ISO 15649:2001
ISO/TR 15916
ISO 16110-1
ISO 16111
ISO 17268
ISO 21009-1
ISO 21010
ISO 21011
ISO 21012
ISO 21013-1
ISO 21013-2
ISO 21013-3
ISO 21028-1
ISO 22734-1
ISO 24490
ISO 26142
ISO 31000
ISO/IEC 31010
ISO/IEC/DIS 80079-36
ISO/IEC/DIS 80079-37.2
ISO/IEC Guide 51
ISO/IEC Guide 73
IEC 60068-1
IEC 60079-0
IEC 60079-2
IEC 60079-10-1
IEC 60079-11
IEC 60079-14
IEC 60079-17
IEC 60079-19
IEC 60079-20-1
IEC 60079-25
IEC 60204-1:2005
IEC 60364
IEC 60529
IEC PT 61000-3-1
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-3-4
IEC 61000-3-5
IEC 61000-3-11
IEC 61000-3-12
IEC 61000-6-1
IEC 61000-6-2
IEC 61000-6-3
IEC 61000-6-4
IEC 61508
IEC 61511
IEC 62061
IEC 62305-1
IEC 62305-2
IEC 60364-4-41
CGA G-5.5
UN GTR No. 13
SAE J2600:2015-08
SAE J2601:2014-07
SAE J2799:2014-04
ISO 3864
ISO 5817
ISO 7000
ISO 7751
ISO 10628-1
ISO 11114-2
ISO 12944-7
ISO 16528-1
ISO 17398
ISO 23208
IEC 60079-4
IEC 60079-6
IEC 60079-30-1
IEC 60417
IEC 60445
IEC 60446
IEC 60947-4-1
IEC 61082-1
IEC 61882
IEC 61069-7
IEC 61340-4-1
IEC 61340-5-1
IEC 62023
EN 764-7
EN 1081
EN 1503-2
EN 1626
EN 12434
EN 13237
EN 13371
EN 13458-1
EN 13458-2
EN 13458-3
EN 13501-2
EN 13501-3
EN 13530-1
EN 13530-2
EN 13648-1
EN 13648-2
92/58/EEC
94/9/EC
97/23/EC
99/92/EC
2004/108/EC
2006/42/EC
IGC 075 07 E
NSS 1740.16-1997
BCGA CP41 – 2014
BCGA CP33 – Rev 1 – 2012
NFPA 2
NFPA 55
NFPA 70
ASME A13.1
ASME B31
CSA-HGV 4.3
CGA G-5.5
CAN/BNQ 1784-000/2007
GB 50516-2010

All current amendments available at time of purchase are included with the purchase of this document.

Product Details

Published:

07/31/2016

ISBN(s):

9780580852688

Number of Pages:

134

File Size:

1 file , 4.8 MB

Same As:

ISO/TS 19880-1:2016

Product Code(s):

30294718, 30294718, 30294718

Note:

This product is unavailable in United Kingdom